Hi, music lovers today in this article we are going to see this Fu Tech Ft003 Mini 5.1 dTS/Dolby digital decoder kit version 1.1 Unboxing and Technical Details.
This 5.1 decoder Is mainly used for getting an original 5.1 audio effect from your old Home theater, 5.1 amplifier, old Avr receivers, and remote kits That have only analog 5.1 Input. If you want to get an original 5.1 surround output from your tv then this board is very useful to you. You can play Amazon, Netflix, Hot star, and anyone ott platform that supports 5.1 output content and all other downloaded 5.1 content.
And Also you can give this board a quality stereo input and get a PCM 5.1 Prologic output from this board. This board can be used with 5.1 home theater and Amplifiers. Many people asking me about this board can run with a stereo amplifier. I recommend this board is not suitable for Stereo or 2.1 amplifiers. This board is only Suitable for 5.1 Home theater and Amplifiers.
Now let’s Unbox This
This board Comes with
- 5.1 decoder
- RMC cable
- Back panel
- Fitting Screws
You can Fix this board With this back panel And Fix it in your existing Amplifier.
Now let’s see this 5.1 dTS/Dolby digital decoder kit board Input and output connection and how to use this board
As you can see this board can decode Dolby, Dts, and PCM. On this board, There is a separate Led indicating lights for Which input is receiving on this board. For example, I’d Your Tv plays Dts Content then you can see this board Indicate Dts led.
This board has 3 input sources
This HDMI Arc Only Support When you tv or Set of boxes Or any other device that supports HDMI ARC output. Old TV or Some devices only support HDMI will not support this board… so only give HDMI input of the tv support HDMI ARC. If your computer, play station, and Blu-ray player support Optical or coaxial output. You use Connect that with this board and get the original 5.1 output. This board has 3 sources of input and there is a separate Led indicator For Which the input source is playing and an input selection switch.
You can see all the connections are clearly mentioned on the PCB. This board Can be operated with 12v DC.
You can connect this board with your existing Remote kit amplifier Board without any configuration.
As I have mentioned before. This board is Only suitable for 5.1 Home theater, and amplifiers that don’t have a digital input. And it’s not suitable for a Stereo amplifier or 2.1 amplifiers.
So that’s all friends. If you have any questions about this board you can Ask me in the comment section below 👇. And this board is available for sale from me. If you want this board you can contact me through WhatsApp or my Facebook page.
This Post Has One Comment
Pingback: DTS x vs Dolby atmos which is best and 5 reasons why? - Amplifier Making DIY